How to roof a house?

kyler11
Asked Dec 28, 2009
Edited Dec 28, 2009

If you are looking for a place to share your travel photos and stories, then try BigRoom.

A roof can be the most distinguishing feature of a house or building, with the ability to make or break the desired appearance. It will also be your main source of insulation and temperature control, and protection against weather damage and the sun. Therefore, designing your roof style, choosing materials, drawing up framework and incorporating features such as drainage, coatings, vents, insulation and skylights, should all be planned meticulously and carried through precisely.

The Different Steps Involved

Depending on the choices you make regarding roof style, materials, cost, etc, the different stages and procedures in roofing a house can differ greatly. The following is a very simple layout of the generic, basic, steps involved in how to roof a house:

Design your roof and draw up a plan.
Strip previous roof of all old, damaged and useless materials. Clean what remains.
Measure your roof to determine its dimensions and the amounts of materials required.
Re-nail or replace sheathing.
Install ice and water guard.
Install felt underlyments.
install flashings/soil boots.
Install vents and ventilation.
Install shingles from left to right, starting at lowest left-hand corner.
Remember that roofing professionals are experts in walking and moving around on roofs. Always exert the utmost safety when working on your roof, and never pursue something that you cannot do stably and safely.

http://www.roof101.com/do-it-yourself/roof-house.php
figment
Answered Dec 28, 2009
It all depends upon the structure and architecture of the house which is supposed to be roofed. I think, a roofer will know it better than anyone else.
http://www.choiceroofcontractors.com/contractor-network/
AngelinaRobort
Answered Jul 22, 2014
We are making prefab building for different purposes. This is the problem of roofing in your permanent house. First consult with our technicians and then tell details, if they have any knowledge they can help you but it is not sure.
aussiepanel.com.au
Jacos
Answered Oct 28, 2015
The first step in learning how to roof a house is understanding what you need.

Does your location require you to have a permit? Look into that, and get one if you need it (you can usually work through steps 1 and 2 before you obtain your permit).
Read up on roof safety. Does everyone working have the right shoes and a helmet? If you’re working near electrical wires, have they been inspected for safety lately?
If you’re re-roofing, tear off the old material and see where you can recycle your shingles and nails.
For roofing services visit: http://www.tightsealwaterproofing.com.au
tightseal
Answered Feb 03, 2016
JFerg Pros Amarillo is a specialized construction with the top experts specializing specifically in Amarillo roofing, foam insulation, and windows!

amarillo roofing
amarillo roofers
amarillo roofing companies
amarillo roofing company
amarillo roofing contractor
roofing
roofer

http://jfergpros.com/amarillo/
jfergpross
Answered Nov 24, 2016
If you are considering to ceiling your home ,don t do the fix go for new one.Ask your buddies for good specialist of your area.What your aircraft about home structure style it .
http://www.hopperoofing.com/flat-roof-repair/
CoatingsIowa
Answered Dec 08, 2016
There are many home improvement projects you can tackle with your own hands and tools. Not only does it save you money—you’ll also have the pride of knowing you did it yourself. Choose a self-stick underpayment, as it’s best in shedding water and protecting against damage from wind. Make sure it’s completely flat before using nails or staples to fasten it to your roof.
http://lbcommercialroofing.com/single-ply-roofing/
LCommercial
Answered Dec 15, 2016
Any homeowner wants their house to be as safe and secure as possible. It all starts with the roof. Though roofing materials generally have a lifespan of 20-30 years, roofs will wear out sooner or later and can cost several thousand dollars to be done professionally.

1. Learn your local building codes regarding roofs.
2. Obtain any necessary permits.
3. Choose an appropriate kind of shingles. 1) Asphalt 2)Slate 3) Wood etc.
4. Determine how many shingles you need for the job.
5. Measure the length of a shingle as it lies across the roof.
6. Take the proper safety precautions.
7. Rent a trash container.
8. Start removing the shingles at the peak farthest from the trash container.
9. Remove the metal flashing around chimneys, vents, and valleys in the roof.
10. Clean the roof.
11. Install an ice and water barrier and asphalt felt.
12. Complete "weathering-in" your roof with the asphalt roofing paper.
13. Mount drip molding around the perimeter of the roof.
14.Place the flashing in the valleys of the roof, where two sections create a valley.
15.Pop a series of chalk lines with 6-inch (15-cm) spacing.
16.Lay the starter course.
17.Lay the first course.
18. Lay the second row of shingles.
19.Shingle around vents and chimneys.
20.Install preformed ridge shingles.
21.Finish the job.
roofingmel
Answered Mar 30, 2017

TIP: If it's not your answer to this question, please click "Leave a Comment" button under the question to communicate with the question owner.

Categories